220V Commercial Orange Juicer Machine Stainless Steel Commercial
Fruit Squeeze Juicer
Commercial orange juicer can be used in wide range like
bar,restaurant,drink shop , home ,supermarket
,gymnasium,entertainment ,hospital etc
|Material||Stainless steel||Delivery time||20FT: 10days; 40HQ: 15days|
|orange size||40--90mm||Output||22-25 oranges/mins|
|Package size||410*310*780MM||Certificate||CE approval available|
|40' HQ loading||290PCS||FOB Shanghai||USD|
|20' FT loading||120PCS||Warranty||1 Year|
1. Place the machine on the stable table, connect power plug to a
grounded connector plug.
2. Safety check before you turn on the machine:
1) If the nut (4 units) screw down properly.
2) If place the knife rest correctly (press it on the bottom).
3) Place the cover on, screw down two side nut (2 units).
3. It can be used after turn on the power.
4．Put antisepsis and washed fresh oranges (40-80mm) in, the machine
will peel the skin, producing
fresh juices, filtrate automatically
A pair of peeling implement(two),one of 5A fuze,one of cross
implement, one of 8-10mm
spanner,one of electronic supply.
1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out
with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small
brushes available such as nail brushes
that can be used to clean the nooks and crannies.
6.For more thorough cleanings, fill the sink with water and add
7.Soak each piece for a few minutes and then wash with a brush or
8.Pay special attention to the mesh strainer as this can quickly
build up with pulp and juice debris. Do not
allow the juice particles to dry in this fine screen or they will be
difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the
machine itself. Although the juice is
designed to go through a certain route in the juicer, juice and
pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set
them on a towel or drying rack.
11.Reassemble the juicer.