Polymer Composites 3d Printer filament , 3.0 mm , five colors. Like
1, Wire diameter: 1.75/3.0 mm
2, Print temperature: 200-220
3, The printing plate: without heating
4, Plastic plate: black disk (disk diameter of 200, the shaft hole 56
5, Weight: 1 KG net weight, gross weight 1.3 KG
6, Advantages: High gloss,strong toughness, easy stripping, print
7, Have Blue / Yellow / Red / Green / White five colors.
8, Imitation silk, silk
1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it,
use vacuum package, every Tray into a small box, and the each 8
small box into a master carton.
2, Plastic tray:
Diameter 200mm, axle hole 56mm, overall height 70mm. the
corresponding carton 43.5×43.5×18cm
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never
use recycled material or regrind material,
and all had achieved the latest REACH certificate.
2, Before the mass production, our engineer always do the test to
make sure that sure that each batch of
new raw materials must be printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right
range of 1.75 / 3.0mm, and our engineer will adjust it immediately
when it alarms to indicate of wrong size,
and this unqualified filament will be cut off and never use it.
4, We to keep the filaments dry, each roll of filament is packed in
a vacuumed poly bag with a desiccant
inside of it